Pulsar Measurement
Measurement Instrumentation Manufacturers
Pulsar Measurement are British and Canadian manufacturers and suppliers of non-contacting ultrasonic and radar level, volume, open channel flow, pipe flow, sludge blanket level measurement and pump control instrumentation. Their products are used in a wide variety of industries and applications worldwide.
STAND NUMBER:
01.509
CATEGORIES:
Trading regions
Africa:
Algeria, Angola, Benin, Botswana, Bouvet Island, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Rep, Chad, Comoros
Americas:
American Samoa, Anguilla, Antigua & Barbuda, Argentina, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Brazil, Canada
EVENT:
Aquatech Amsterdam 2025
ADDRESS:
Cardinal Building, Enigma Commercial Centre, Sandy WR14 1JJ MALVERN WOR United Kingdom
WEBSITE:
Products
View all products
dB Ultrasonic Transducers
The dB Transducer series is a range of level senso
The dB Transducer series from Pulsar Measurement is a range of level sensors for wastewater and industrial environments. Ranging from 3 m (9.8 ft) to 40 m (131.2 ft) all of our ultrasonic level sensors provide a reliable level, volume, open channel flow pump control, and differential level measurement for both liquid and solid applications. All the dB Ultrasonic Transducers from Pulsar Measurement feature unique DATEM technology, found only in Pulsar Measurement level sensors. Digital Adaptive Tracking ofREFLECT™
2-wire radar sensor that provides accurate level o
The REFLECT™ 2-wire radar sensor provides accurate level or volume monitoring of liquids and solids in critical measurement applications, ensuring complete peace of mind with a product that requires minimal skills and human intervention, thereby minimizing the lifetime cost of ownership. Outperforming products that, up until now, required frequent and costly manual intervention to validate measurement integrity. The hermetically sealed Pulsar Measurement REFLECT™ level sensors require no routine servicing,AVFM 6.1
Area-velocity Flow Meter for open channels and pip
The AVFM 6.1 Area Velocity Flow Meter uses a submersible ultrasonic sensor measuring both the level and velocity of flowing liquid to calculate flow measurement in an open channel or pipe. The sensors are mounted either inside a pipe or at the bottom of a channel, and the sensor is built to resist fouling, corrosion, and abrasion. The AVFM 6.1 Area Velocity Flow Meter can be configured with the standard submerged velocity-level sensor or with submerged velocity in combination with separate non-contacting uldBi Intelligent Transducers Range
Self-contained, intelligent measurement
Pulsar's dBi Intelligent Transducer Series, with HART (4-20mA) or Profibus PA communication protocols, are a range of self-contained, intelligent non-contacting ultrasonic level measurement transducers that make plant integration simple. Four range choices are available with either 3m, 6m, 10m or 15m range (10ft, 20ft, 33ft or 49ft).dBi Modbus
The dBi-M series of level sensors are the ultimate
This series of level sensors features Pulsar Measurement's world-leading DATEM echo processing power for accurate and reliable level measurement in the most challenging applications, with a suitable measurement range of 125 mm to 15 m (4.9 in to 49.2 ft). The dBi-M is ready for the most challenging remote applications. The IP68 design enables the unit to be fully submerged, perfect for applications where flooding or surcharging can occur. The ultra-low power consumption of the dBi-M will give you the longeDFM 6.1
The DFM 6.1 Doppler Flow Meter works as a non-cont
The DFM 6.1 Doppler Flow Meter uses Doppler technology makes it perfect for use as a water flow meter, specifically for difficult liquids, or liquids with suspended solids such as wastewater, slurries, sludge, chemicals, viscous liquids, and abrasives. The non-invasive Doppler ultrasonic flow meters fits a pipe 12.5 mm (0.5 in) inside diameter or larger, and clamps to the outside of the pipe, gaining flow measurement readings without interrupting the process.FlowCERT
FlowCERT provides comprehensive open channel flow
The FlowCERT provides comprehensive open channel flow measurement with extensive data logging and control functions. It includes a range of pre-programmed flues and weirs, so setup is quick, simple and straightforward. The unit is compatible with a range of both contacting and non-contacting sensors and has the flexibility to change with your application. FlowCERT gives temperature independent, reliable measurement and logging facilities. The unit includes five alarm/control relays plus 4-20mA output, dataSludge Finder 2
The Sludge Finder 2 provides reliable and continuo
The two-part system has been purposely designed for sludge blanket level measurement, operating ultrasonically through a liquid. The Sludge Finder 2 uses proven echo processing algorithms to identify the sludge interface level using state-of-the-art technology only found in this unit. Sludge Finder 2 is designed to be maintenance free. The Viper transducer is a single beam ultrasonic unit immersed just below the liquid surface. A wiper blade sweeps the transducer face, ensuring that it remains clean. AddiUltra 5
Non-contacting level, flow, and pump control
The Ultra 5 offers pump control, flow measurement, level control, volume calculations, and differential level measurement all in one compact unit. The control unit provides five assignable relays with extra alarm options such as pump efficiency and extra pump control functions such as pump run on, pump exercising, storm and aeration control, and differential level control the addition of further relays in open channel flow applications.PDFM 5.1
Portable flow meter that clamps to the outside of
The ultrasonic Doppler technology used by the PDFM 5.1 makes it perfect for use as a water flow meter, specifically for dirty or difficult liquids that contain bubbles or solids, like wastewater, slurries, sludge, chemicals, viscous liquids, and abrasives. The PDFM 5.1 is ideal for evaluating system performance and can be installed, calibrated, and started up in minutes. Use this flow meter where a permanent flow meter is not required, or temporarily replace installed flow meters. Fast and easy to operate