Products
Portable Transit-time Clamp On Ultrasonic Flowmeter TF1100-EP
The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Two pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility.
Dual-channel Transit-Time Clamp On Ultrasonic Flowmeter TF1100-DC
TF1100-DC Dual-channel Wall-mounted Transit Time Ultrasonic Flowmeter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Two pairs of transducers are sufficient to cover the most common pipe diameter ranges.
Wall-mounted Doppler Ultrasonic Flowmeter DF6100-EC
DF6100-EC Wall-mounted Doppler Ultrasonic Flow Meter is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.
The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, Relays,OCT outputs.
DOF6000 series Partially Filled Pipe Flow Meter
The DOF6000 series flowmeter consists of Flow calculator and the Ultraflow QSD 6537 Sensor.
The DOF6000 series flowmeter consists of Flow calculator and the Ultraflow QSD 6537 Sensor. The Ultraflow QSD 6537 Sensor is used to measure water velocity, depth, and conductivity of water flowing in rivers, streams, open channels and pipes. The flow calculator can calculate the cross-sectional area of partially filled pipe, open channel stream or river, for stream or river, with up to 20 coordinate points describing the river’s shape of cross section. It is suitable for various applications.
EW6800 Series Electromagnetic Water Meter
The EW6800 Series supports pipe sizes from DN40 to DN300, with selectable turndown ratios of Q3:Q1 = 400:1, 250:1, or 160:1. It can work for 8 years.
Lanry EW6800 Series Electromagnetic Water Meter is designed for the water industry, it completely solves the problem of easily clogging and no ability to measure small water flow with tranditional mechanical water meter for achieving the accurate measurement of water flow. Due to it is operated by built-in 3.6V lithium battery, it is suitable for remote areas. RS485 Modbus, LoRaWAN, NB-IoT outputs are available.
Ultrasonic Level Meter LMU
The LMU is compact ultrasonic level meter for continuous non-contact level measurement in liquids and solids.
The LMU is compact ultrasonic level meter for continuous non-contact level measurement in liquids and solids. It consists of probe and electronic units, both of which are leak-proof structure. This series can be widely applied to the metallurgical, chemical, electricity and oil industries.
WM9100 Series Ultrasonic Water Meter
The WM9100 Water Meter is designed for pipes ranging from DN32 to DN600, with options for valve-controlled (pre-paid), threaded, and flanged types.
The WM9100 Series Ultrasonic Water Meter features a no moving parts design, ensuring long-term stable operation with minimal wear and maintenance. It offers a shelf life of about 8 years and includes an abnormal water usage alarm for proactive monitoring. With IP68 protection, it is suitable for both indoor and outdoor use. The meter supports optical, RS485, and wired/wireless M-Bus communication interfaces, and complies with drinkable water standards.