ZCON next gen
New generation of ZCON control unit for out-of-the-box UV Monitoring and Regulation - intuitive operation, modular design and maximum flexibility
Preconfigured UV Control: Ready to use – optimized for ZED ballasts and ZED UV sensors.
Modular Design: scalable IO boards and optional Wiper Control
Precise UV Monitoring and Regulation: Controls UV intensity based on calculated dose, tailored to customer-specific models and system designs.
Intuitive Operation via 12-inch touch display
Simplified Installation: CAT5 patch cables for system wiring + scalable IO boards significantly reduce wiring effort
Read more
ZED Digital UVC Reference sensor
ÖNORM/DVGW compliant Digital UVC Reference sensor
UVC Reference Sensor D-SiCONORM-LP-REF to be used - for calibration checks of DVGW/ÖNORM conform facility sensors - as measurement device - as reference for in-field recalibration of digital ZED sensors > digital signal processing, signal conversion to absolute UVC intensity values in W/m² > measurement ranges: 0.01..250W/m²/0.1..500W/m² > internal operation hour counter The digital ZED reference sensor itself is the complete reference device -it is not bound to a certain radiometer device
Read more
D-SiC, D-SiC-I, D-SiC-U
digital UV-C sensors with digital or analog signal
Sensors for use in UV-C monitoring systems.
The digital signal processing allows the automatic selection of the optimum internal measurement range.
Low pressure types are adjusted for the complete range of 2...500W/m², medium pressure types: range 20...3000W/m².
Digital UV sensors with RS485 interface enable fail safe signal transmission using ModBus or ZCON protocol.
Digital Sensors with analog output incorporate signal converter to classical analog interfaces (4-20mA, 0-2V, 0-10V).
Read more
PHplus-R ballasts
for 4x 320W / 2x 260W / 1200W UV-C lamps
- optimized lamp operation - long lamp-ballast distances up to 30 m - single, dual, triple and quad lamp types - housing types and rack mountable types - adjustable operation parameters - dimmable (optional via 4-20mA, 0-10V, Ethernet) - providing local operation and digital remote control - lamp operation control via RS485 using ModBus or ZCON - status indication with LED, relay or via RS485 - enhanced protection: power range control, undervoltage/overtemperature protection
Read more
PHplus ballasts
controllable and adjustable electronic ballasts
- preheat start ballasts for optimal lamp operation
- long lamp-ballast distances - up to 30 m
- single, dual, triple and quad lamp types
- housing types and rack mountable types
- adjustable operation parameters
- dimmable
- providing local operation and digital remote control
- lamp operation control via RS485 using ModBus or ZCON
- status indication with LED, relay or via RS485
- enhanced protection: power range control, undervoltage protection, overtemperature protection
-
Read more
New Line of Ballasts for Medium Pressure Lamps
The new line of ballasts for medium pressure lamps
Electronic ballasts for medium pressure lamps,
power ranges:
- 200...500W,
- 500...1500W
- 1500...2500W
> ignitor: internal for short cable lengths /
external for long cable lengths
> adjustable operation parameters
> lamp operation control via RS485
using ModBus or ZCON protocol
- power range control
- undervoltage protection
- overtemperature protection
- ground fault protection
optional:
dimming using analog 4...20mA/0...10V interface
Read more
