Loading component...

Loading component...

Products

AMI Silitrace Ultra

Trace silica measurement for high purity water app

On-Line Monitor for Reactive Silica in the Lower Range. High precision photometer for reactive silica. Tempered reaction chamber and replaceable reaction coil. Auto zero before every sample measuring. Measuring range 10 ppt to 20 ppb. Automatic calibration routines. Grab sample testing. Steel panel mounted – Ready to use. Patented sample concentrator lowers detection limit by 40 times to 10 ppt. Factory tested and ready for installation and operation.

Chematest 30

Robust, handheld and accurate – our Chematest 30 a

Fast measurements, reliable results. The Chematest 30 is the basic model for users who emphasize low priced measurements without taking limitations in user-friendliness and measurement quality. The carrying case provides supplementary storage space for all the necessary measuring equipment needed for daily quality measurements.

AMI Trides

Amperometric analyzer for disinfectans

Amperometric analyzer for disinfectans such as hypochlorous acid, free chlorine, chlorine dioxide, ozone, bromine, iodine.

AMI Codes-II CC

Colorimetric process analyzer

Colorimetric process analyzer (DPD-method) for measurement and dosing control of disinfectants such as free chlorine, monochloramine, total residual chlorine and combined chlorine

AMI Turbiwell

Turbidity measurement; non-contact nephelometry

High precision, non-contact nephelometer based on ISO 7027 (EN 27027, DIN 38404) for the continuous measurement of turbidity in pure water, potable water, surface water treatment and effluent.

AMI Solicon4

Automatic Measurement of Specific Conductivity

Monitor AMI Solicon4 consisting of accurate 4-electrode conductivity sensor, user-friendly transmitter and flow cell. Applications in surface water,potable water and effluents. Option: with integrated digital flow meter available. emperature compensation with selectable coefficient or non-linear function according to EN 27888/DIN 38404. Precise quality-system: inexpensive, low maintenance, and simple to handle. Complete panel mounted system; tested, calibrated and ready for operation.

AMI Phosphate-II

Measurement of phosphate in low concentrations

Monitor AMI Phosphate based on a robust process photometer for the determination of phosphate (PO4) in the range of 0.01 – 10 ppm (mg/l). Applications in potable water, effluents and cooling water. No interferences with silica! The automated, chemical cleaning module extends the maintenance-free operating time. Precise quality-system: low maintenance, precise and simple to handle. Complete system mounted on a PVC panel: tested, calibrated and ready for operation.

AMI LineTOC Compact

TOC Measuring in Pharmaceutical Industries etc.

FDA 21 CFR Part 11 Compliant Automatic Function Test. Challenge your system. Daily, weekly or upon request. Grab Sample Measurement At the push of a button. No extra gear necessary. Continuous Measurement 100% Monitoring. Anytime, exact and prompt. Fast Response A result in less than 2 minutes. System Suitability Test (SST) according to USP and EP.

AMI Oxysafe

Monitor for measurement of dissolved oxygen

Monitor for continuous measurement of dissolved oxygen in potable water and effluents

AMI pH/mV:pH/mV

Analyzer for the measurement of pH and Redox (ORP)

Complete Analyzer for the continuous measurement of pH and Redox (ORP) potential in potable water and effluent.

AMI ISE Universal

Monitor for continuous measurement of Ammonium

Monitor for continuous measurement of Ammonium respectively Nitrate in potable water.

Monitor AMI Oxytrace QED

High precision monitor

High precision monitor with three electrode Oxytrace G sensor for the continuous measurement of trace levels of dissolved oxygen in high purity water. Integrated auto verification with faraday electrode setup. Range: 0-20 ppm or 0-200 % saturation (at 25°C). Automatic air pressure and temperature compensation. Short rinse-down time due to integrated guard. Faraday electrode and control unit for the automatic or manual verification. Factory tested, ready for use.

Monitor AMI Oxytrace

High precision monitor

High precision monitor with three electrode Oxytrace G sensor for the continuous measurement of trace levels of dissolved oxygen in high purity water. Range: 0-20 ppm or 0-200 % saturation (at 25°C). Automatic air pressure and temperature compensation. Short rinse-down time due to integrated guard. Factory tested, ready for use.

Monitor AMI pH-Redox

Monitor for measuring pH or redox (ORP)

Monitor for continuous measurement of pH or redox (ORP) in potable water and effluents. Complete system mounted on PVC panel: Transmitter AMI pH-Redox in a rugged aluminum enclosure (IP 66). Flow cell M-Flow 10-3PG with temperature sensor (Pt1000). Factory tested and calibrated. Ready for installation and operation. For use with combined sensors with reference elctrodes for various sample conditions: Swansensor pH Standard or ORP Standard Swansensor pH SI or ORP SI Swansensor pH AY or ORP AY

QA-Monitor AMI INSPECTOR pH

Portable instrument

The portable AMI INSPECTOR is a complete monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, pH process monitors. Measurement range: 1 to 12 pH Rechargeable battery for stand-alone operation for at least 24 hours.

Analyzer AMI Phosphate HL

Colorimetric process analyzer for phosphate

Colorimetric process analyzer for the automatic, continuous measurement of phosphate. Measuring range: 0.1 to 50 ppm (mg/L) PO4 Based on colorimetric measurement principle. Complete system including measurement and control electronics, photometer, flow indicator, reaction chamber, reagent dosing system and reagent containers. No interferences with silica Control of sample flow and reagent fill level. Factory tested and calibrated. Provides immediate results.

Chematest 35

Robust, handheld and accurate – our Chematest 35 a

The Chematest 35 is characterized by an enlarged range of methods and accessory measuring equipment. The robust and long-living pH- and redox potential sensors are suitable for measurements in clan up heavily polluted samples. These digital sensors are equipped with an integrated temperature measurement and are delivered with a high-quality protection vessel. They are easy to operate, fast and economical in use. The enlarged carrying case provides supplementary storage space for all the necessary measuri

Chematest 42

The unique and brand new multiparameter device whi

The well known Chematest devices from Swan are lifted to the next level. With the Chematest 42 a very important parameter in various fields of application is now covered as well – the turbidity. Turbidity measurements are fully compliant to DIN ISO 7027-1 and US EPA 180.1. The individual factory calibration of every device guarantees a robust and accurate low-rage turbidity measurement from 0.01 FNU/NTU. Highest precision and repeatability result from the fixed cuvette position – the cuvette is mechanical