Kurita Europe GmbH
Industrial water and process treatment solutions
Kurita's water treatment technologies are assisting businesses globally in conserving resources, enhancing plant efficiency, and promoting environmental sustainability. Our cutting-edge solutions effectively address water management challenges, promote sustainable energy usage, reduce waste, and advance industrial production technologies. Ensuring ethical business practices with a positive impact on the world is our topmost priority that demands our daily attention.
STAND NUMBER:
12.617
CATEGORIES:
Products and services
Water Treatment:
Building materials, Filters, Filtration other, Purification/cleaning, Purification methods, Purification Plants
Wastewater:
Separators, Sewerage, Sludge
EVENT:
Aquatech Amsterdam 2027
ADDRESS:
Theodor-Heuss-Anlage 2 68165 Mannheim Germany
WEBSITE:
Products
View all products
ACF Technology
Prevention of fouling and corrosion
The new ACF (Ammonium Chloride Free) technology uses additives that are chemical liquid formulations based on a very strong organic base. It prevents salt fouling and corrosion in crude distillation units, FCC units, hydrotreaters, hydrocrackers, reformer units and other process equipment, where such disturbances are observed regularly.Read moreCetamine®
Energy savings for your boiling system
Kurita’s comprehensive Cetamine® Technology provides excellent protection against corrosion in boiler systems. Composed of film-forming substances, Cetamine creates a hydrophobic protective film acting as a barrier between water and metal, effectively inhibiting corrosion and scaling. As an all-organic treatment program, Cetamine® allows optimized blow-down rates with higher cycles of concentration leading to significant lower fresh make-up water consumption, savings in energy and reduction of CO2Read moreDReeM Polymer®
Awarded silica and hardness removal polymer
DReeM Polymer® is Kurita’s awarded Dispersion Removal effect Management Polymer for steam generators and boiler systems. The multi-functional properties of DReeM Polymer® keep heated surfaces in boiler systems free of scale and remove existing hardness and silica deposits from system surfaces during normal boiler operation. Clean heat transfer surfaces will directly improve boiler efficiency leading to energy savings and a significant reduction in carbon dioxide emissions.Read moreKurita Dropwise Technology
Boosts heat transfer efficiency in heat exchangers
The product is dosed continuously into the steam line in front of the target device creating a water repellent film on the surfaces. Increasing the water repellency greatly improves heat transfer efficiency, which helps to optimise productivity. At the same time the steam consumption is reduced leading to less fuel consumption and cutting down costs for water and energy.Read moreFReE Technology
Online Cooling System Cleaning Technology
FReE is Kurita's Fouling Removal Efficiency Program and increases heat transfer of your cooling system without plant shutdowns. A total cleaning is performed during operation, without being corrosive and with no generation of waste. We are committed to developing solutions which help both our customers in an environmentally friendly approach.Read moreKuriverter® IK
Slime control agent for membrane systems
Kuriverter® IK-110 removes biofilm from the membrane’s surface while preventing future bio growth. Kuriverter® IK-220 is an enhanced formula for deeper biofilm penetration at lower doses. Kuriverter® chemicals are an effective way to maintain system water quality and quantity, extend time between cleanings, and reduce energy consumption.Read moreS.sensing® CS
Online monitoring optimises wastewater treatment
Wastewater automation system for real-time monitoring & dosing control: Kurita’s S.sensing® CS technology offers an innovative equipment to control the product dosage in industrial wastewater treatment systems. This state of the art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs.Read moreSSK System
Kurita’s Aeration Technology for Paper Industry
SSK is an aeration and biocide combined technology. The existence of plenty of bacteria in the system means that oxygen is consumed, the oxidation reduction potential exhibits a negative value, and the entire system is anaerobic. Traditionally, a slime layer is generated in the stagnant part but with Kurita´s technology, the stagnation part disappears.Read moreKuristuck B800
Paint booth treatment
Kuristuck is an innovative technology for detackification and coagulation for solvent and water-based paints. In paint booth systems, different body and spare parts from automotive, appliance, electronics, plastics and other industries are coated by using one or multiple layers of paints. The main goal of the paint booth treatment is to remove as much overspray paint as possible for successful operations. Our Kuristuck technology meets this requirements.Read moreBOSS
Block Off Severe Scale in geothermal
Chemical treatment is one of the essential applications of all types of geothermal utilization. There are different approaches to treatment programs, such as avoiding damages and performance enhancement techniques. Kurita Geothermal Technology products are accordant with the co-precipitation mechanism of several minerals in geothermal flow. Do you want to try a new concept to increase the efficiency of your process? BOSS: Block Off Severe Scale in geothermal Prevent severe scaling in surface facilitiesRead more
Downloads
Image brochure Kurita Europe
Sustainable solutions for efficient plant operations: Customised technologies for industrial water, paper and process treatment